sintered density meaning in English
烧结密度
Examples
- Abstract : mo - cu alloys were analyzed for sintered density and thermal conductivity . and also , a further study of their preparing methods was made
文摘:对钼-铜合金材料的烧结密度及其导热性能进行了实验分析，并进而研究分析了钼-铜散热片的加工工艺。 - No remarkable grain growth has been found during the phase transformation annealing . high sintering densities over 83 % of theoretical ones have been obtained for the hot - pressed samples
实验结果表明，热压试样都有较高的烧结密度，致密度均超过83 ，最高达到了99 。 - The experimental results illustrate that the powders ni and cu can promote the sintering densities of w and mo alloys . in the processing of sintering , cu powders melt to become liquid and ni , dissolved in liquid cu , shows more activating sintering feature than the solid ni
实验结果表明：烧结助剂ni 、 cu的添加有助于w 、 mo合金致密度的提高，在烧结致密化过程中， cu主要起到溶解ni的作用， ni溶解主晶相促进致密化的进行。 - The experimental results show thatthe high sintered density of m2t and fine thermal stability could got with the 5wt % additive of zro2 at 1500c for 2 hours . and the additive of m2t can effectively restrain the decomposition of at and promote the sinter process , which enhanced the density of at and promote the strength
实验研究表明， m2t在加入5wt的zro _ 2后，能够在1500保温2小时烧结致密，且热性能稳定。 m2t不但可以有效地抑制at的分解，而且能够有效促进at的烧结，提高at的致密度，进而提高其力学强度。 - W - cu composites prepared from the precipitation w - cu powder have higher sintered density , better mechanical and physical property , more homogeneous and finer microstructure than those prepared from w - cu powder by the balling - reduction method . in chapter 5 , a combination of homogeneous precipitation and ball - milling process , namely the mechano - thermochemical process was employed to prepare ultra - fine w - cu powder
其中，球磨w一cu复合粉( hp一m )压坯在1150下烧结30min后，可获得相对密度大于99 %的几乎全致密的超细晶粒w一cu复合材料， w的颗粒度小于0 . 5林m 。